Clark Dietrich Building Systems

Clark Dietrich Building Systems 1" #66N Short Flange Casing Bead with Weep Holes

Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear straight line at doors, windows, or other

Clark Dietrich Building Systems 1/2" #66N Short Flange Casing Bead without Weep Holes

Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear straight line at doors, windows, or other

Clark Dietrich Building Systems 1/2" #66N Short Flange Casing Bead with Weep Holes

Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear straight line at doors, windows, or other

Clark Dietrich Building Systems 7/8" #66N Short Flange Casing Bead without Weep Holes

Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear straight line at doors, windows, or other

Clark Dietrich Building Systems 7/8" #66N Short Flange Casing Bead with Weep Holes

Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear straight line at doors, windows, or other

Clark Dietrich Building Systems 1/2" x 10' #15 Zinc Double-V Expanded Flange Control Joint

#15 Zinc Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings and stucco areas. This nearly inconspi

Clark Dietrich Building Systems 3/4" x 10' #15 Zinc Double-V Expanded Flange Control Joint

#15 Zinc Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings and stucco areas. This nearly inconspi

Clark Dietrich Building Systems 3/8" x 10' #15 Zinc Double-V Expanded Flange Control Joint

#15 Zinc Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings and stucco areas. This nearly inconspi

Clark Dietrich Building Systems 7/8" x 10' #15 Zinc Double-V Expanded Flange Control Joint

#15 Zinc Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings and stucco areas. This nearly inconspi

Clark Dietrich Building Systems 1.75 Lb. Flat Metal Lath

A superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone reinforcement.

Clark Dietrich Building Systems 2.5 Lb. Flat Metal Lath

ClarkDietrich Junior™ diamond mesh lath is used as a substrate for Portland cement or gypsum plaster stucco on either interior or exterior walls, ceilings, soff

Clark Dietrich Building Systems 2.5 Lb. Paper-Backed Metal Lath

A superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB) metal l

Clark Dietrich Building Systems 2.5 Lb. Self-Furred Metal Lath

Clark Dietrich Building Systems 3.4 Lb. Self-Furred Metal Lath

Clark Dietrich Building Systems 6" x 8' Striplath Plaster Reinforcement

Striplath is a flat expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It's commonly attached diagon

Clark Dietrich Building Systems 20 Gauge x 1-1/2" x 1-1/2" x 10' Drywall Metal Angle

A standard galvanized steel product, which is often field cut to job site conditions for the ultimate use as a connector for framing members. On interior framin

Clark Dietrich Building Systems 30 Gauge x 10' 120° Drywall Metal Corner Bead

Metal Corner Bead is used to provide a high-quality finish and solid protection at drywall corners. This traditional drywall finishing product is stapled, naile

Clark Dietrich Building Systems 30 Gauge x 10' Drywall Metal Corner Bead

Metal Corner Bead is used to provide a high-quality finish and solid protection at drywall corners. This traditional drywall finishing product is stapled, naile

Clark Dietrich Building Systems 30 Gauge x 12' Drywall Metal Corner Bead

Metal Corner Bead is used to provide a high-quality finish and solid protection at drywall corners. This traditional drywall finishing product is stapled, naile

Clark Dietrich Building Systems 30 Gauge x 8' Drywall Metal Corner Bead

Metal Corner Bead is used to provide a high-quality finish and solid protection at drywall corners. This traditional drywall finishing product is stapled, naile

Clark Dietrich Building Systems 30 Gauge x 9' Drywall Metal Corner Bead

Metal Corner Bead is used to provide a high-quality finish and solid protection at drywall corners. This traditional drywall finishing product is stapled, naile

Clark Dietrich Building Systems 5/8" x 10' #66X Zinc Expanded Flange Casing Bead

66X Zinc Expanded Flange Casing Bead is used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear s

Clark Dietrich Building Systems 4" x 8' Striplath Plaster Reinforcement

Striplath is a flat expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It's commonly attached diagon

Clark Dietrich Building Systems 27" x 97" Galvanized Diamond Mesh Lath - 2.5 Lbs.

A superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB) metal l