Roofmaster

Roofmaster 24" Hard-Grey Squeegee with Handle

Straight-style Squeegees have a steel frame with solid rubber smooth blades. It Includes 1-1/8" x 60" tapered handle.

Roofmaster 24" x 1/4" x 1/4" Slotted Squeegee w/o Handle

24" wide wood block with 1/4" wide x 1/4" high slots and tapered hole for a handle to be used to apply roof cement. Requires a tapered handle (201500).

Roofmaster 26" Shingle/Slate Ripper

Shingle Slate Ripper is used for removing broken slate and pulling nails from composition shingles/wood shakes on reroofing. It has a thin blade with a hooked e

Roofmaster 18" Kinney Steel Broom less Handle

Roofmaster 1-1/8" x 60" Tapered Hardwood Handle

Tapered Wood Handle is made of No. 1 straight-grain 1-1/8" hardwood 60" long, smoothly sanded with one end rounded and other end tapered.

Roofmaster 1-1/8" x 5' Threaded Hardwood Handle

Threaded Hardwood Handle is made of No. 1 straight-grain 1-1/8" hardwood 60" long, smoothly sanded with one end rounded and other end threaded.

Roofmaster Tigerr Tear Off Notched Edge Spade with Reinforcement

These high-performance fiberglass handled tear-off spades have more than double the breaking strength of our wood-handled spades. Tigerr Spades only cost about

Roofmaster Tigerr Tear Off Notched Edge Spade with Fulcrum

These high-performance fiberglass handled tear-off spades have more than double the breaking strength of our wood-handled spades. Tigerr Spades only cost about

Roofmaster Tear Off Spade with Fulcrum

Our traditional wood-handled tear-off spades have been top performers in the roofing industry for many years. A solid premium-Ash handle makes it the strongest,

Roofmaster Wood Handle Tear Off Spade with Reinforcement Only

Our traditional wood-handled tear-off spades have been top performers in the roofing industry for many years. A solid 1-3/8" diameter premium-Ash handle makes i

Roofmaster U-101 Utility Blades - Pack of 5

Package of 5 Utility Blades. U-101.

Roofmaster #36 Roofers Warehouse Broom

Roofers Warehouse Broom is made with heavy corn stalk center. It is used to sweep roof decks.

Roofmaster Wisk Broom

Wisk Broom is made of selected fine broom corn. Sewed two times, cad. plated ring cap. This is the best quality whisk broom for home, automobile and office.

Roofmaster Magnetic Hammer - 18 Oz.

Magnetic Hammers are used for nailing metal flashings and a third hand would be very helpful. Its patented flange on the head supports the handle and prevents i

Roofmaster 5-1/2" Imported Pointing Trowel

Economical imported trowels have hard, tempered ground and polished blade with a hardwood handle and steel ferrule securely attached.

Roofmaster 3" x 6-1/4" Modified Trowel

Modified Trowel have Highest Quality Forged in one piece. Flexible highest grade trowel steel, tempered, hardwood handle, ground polished and polished steel fer

Roofmaster Skeleton Ratchet Caulking Gun - 1/10 Gallon

This Zinc Plated drop-in ratchet caulker has a slotted edge cap for fast loading, spout cutter and needle. Takes all 1/10 gal spouted cartridges. Non-slip, two-

Roofmaster 1# Fiberglass Mop Ring

Build your own mops to save time and money by adding new mops rings to the ring holder. The original mop forms a short center and increases hot asphalt pickup.

Roofmaster 7# Super Spread Mop

Roofmaster offers a variety of fiberglass mops from the most efficient to budget savers. Our highest performers, the Super Spread Mop, spreads 25-30% more "hot"

Roofmaster Mop Ring Holder - Compression Style

Compression head-type ring holder with spring for a tighter hold. These Mop rings are slipped over inner sleeve, then inserted into the outer sleeve and compres

Roofmaster Insulation Hot Knife with Blade

110V Hand held tool, heats up in just six seconds. Cuts up to 4" insulation board. Double insulated, this tool comes with a 10' cord and features an interchange

Roofmaster Super Six Roofcutter Blades

18000 carbide contacts to the roof per minute, which makes Super Six Roofcutter Blade the most powerful blade in the industry. This blade performs with more pow

Roofmaster 3 Knot Tampico Brush

Three Knot brush with Tampico Fiber are securely attached in a hardwood block with one tapered handle hole. Block size: 6-1/4"L x 1-3/4"W Length of Trim: 48 inc

Roofmaster Seam Roller with Double Fork

2" Diameter Steel Seam Roller with (rounded) edge and Double Fork. Use Seam Roller to tuck your TPO into tight corners.