Cor-A-Vent

Cor-A-Vent Sturdi-Starter

Sturdi-Starter™ is an extruded polypropylene plastic strip used as a starter strip behind the first course of fiber cement siding. Sturdi-Starter™ replaces stri

Cor-A-Vent Coravent Sturdi Bat 7/16X1-1

Cor-a-vent V300E 7" Wide 4' Pc

Cor-a-vent V600E 8.5" Wide 4'Pc

Cor-a-vent V600T 4'/Pc Carton

Cor-A-Vent 4' V300 Ridge Vent

The V-300® ridge vent is Cor-A-Vent's most popular ridge vent for a variety of reasons from ease of installation, to its low profile and power-nailability, the

Cor-A-Vent 20' Fold-A-Vent

A flat, continuous 20' folded ridge vent that won't roll back up and won't hump up under the cap shingle. Low 5/8" profile virtually disappears beneath the cap

Cor-A-Vent 1" x 11/2" x 4' S-400 Strip Vent — Ventilation and Drainage — CORS400W

The original, continuous soffit venting solution is still the best choice for venting overhangs and eaves and once architects find out about it, they spec it on

Cor-A-Vent 1" x 11/2" x 4' S-400 Strip Vent — Ventilation and Drainage — CORS400T

The original, continuous soffit venting solution is still the best choice for venting overhangs and eaves and once architects find out about it, they spec it on

Cor-A-Vent 1" x 11/2" x 4' S-400 Strip Vent — Ventilation and Drainage — CORS400B

The original, continuous soffit venting solution is still the best choice for venting overhangs and eaves and once architects find out about it, they spec it on

Cor-A-Vent 8-1/2" x 4' V600

8-1/2" 4' Piece comes with below features: Exceeds all national building codes for ventilation Easy to install, cuts with utility knife ? no waste Creates a wel

Cor-A-Vent RS-400 Raft-A-Vent

Cor-A-Vent 7" x 4' V300 Ridge Vent

The V-300® ridge vent is Cor-A-Vent's most popular ridge vent for a variety of reasons from ease of installation, to its low profile and power-nailability, the

Cor-A-Vent Roof-2-Wall Vent - 24 Lin. Ft. Box

Roof-2-Wall Vent does just what it says -- it's a ventilation package for the tough-to-vent detail where a pitched roof meets a vertical wall. Roof-2-Wall Vent

Cor-A-Vent 3/4" x 1" x 4' PS-400 Soffit Strip Vent

Cor-A-Vent's PS-400 Strip Vent is a 1" wide by 3/4" high (vertical dimension) soffit strip that will perfectly match the thickness of a 1x soffit board. The PS-

Cor-A-Vent 4' SV-5 Siding Vent

Trapped moisture behind siding can wreak havoc on your home's exterior, causing peeling paint, rotting wood, deteriorating underlayment, and mold or mildew grow

Cor-A-Vent 4' In-Vent

IN-Vent attic roof vent is an on-the-rooftop, intake ventilation product that lets fresh air in when traditional soffit vents are out. IN-Vent is ideal for roof

Cor-A-Vent 20' Revolution Rolled Ridge Vent

Revolution (REV-11 and REV-9) are the only truly "Green" ridge vent available. The 11-inch and new 9-inch wide by 20-foot long plastic vent core is made entirel

Cor-A-Vent 11" x 4' V400E

Cor-A-Vent 11" x 4' V300E Enhanced Ridge Vent

V-300E Enhanced ridge vent is ideal for hip use. V-300E's low profile on the hips allows it to blend in with the roof. V-300E is also available in feature the E

Cor-A-Vent 4' V600TE

Cor-A-Vent 8-1/2" x 4' V300 Ridge Vent

The V-300® ridge vent is Cor-A-Vent's most popular ridge vent for a variety of reasons from ease of installation, to its low profile and power-nailability, the

Cor-A-Vent Roof-2-Wall Vent Piece

Cor-A-Vent's Roof-2-Wall Vent does just what is says it's a complete ventilation package for the tough-to-vent detail where a pitched roof meets a vertical wall

Cor-A-Vent 4' V600T