Fry Reglet

Fry Reglet Aluminum Vertical Extrusion 10'

Fry Reglet Fry Fcp Z Trim 1/2X10 Primed

Fry Reglet 3/4" x 1/2" x 10' Anodized Non-Vented Channel Screed Control Joint

Fry Reglet Channel Screed is a traditional molding that gives architectural accents to stucco walls and ceilings, available in a wide selection of reveal dimens

Fry Reglet Fry T2 J-channel 10' Arctic Wh

Fry Reglet Fry V2 Vert Mold 10' Arctic Whi

Fry Reglet Fry H1 Horz Mold 10' Arctic Whi

Fry Reglet H1 Horz Mold 10' Primed

Fry Reglet .025 x 10' Spring Lock Cover

Fry Reglet Aluminum Flashing - Sold per Lin. Ft.

Fry Reglet Aluminum Springlok Flashing with Polyester Coating

SpringLok flashing systems have been tested and proven to resist sustained wind velocities. Flashing snaps in under the reglet so water can't get under the flas

Fry Reglet Galvanized Springlok Flashing

SpringLok flashing systems have been tested and proven to resist sustained wind velocities. Flashing snaps in under the reglet so water can't get under the flas

Fry Reglet 4" MA-4 Masonry Flashing Reglet

Specially manufactured for masonry applications, our Masonry MA Reglet is laid into masonry joints and held in place with mortar.

Fry Reglet Galvanized "Ma" Masonry Reglet

Specially manufactured for masonry applications, this reglet is laid into masonry joints and held in place as the mortar cures. As a result, there is no opening

Fry Reglet Galvanized Stucco Reglet

Fry Reglet Sm Aluminum Reglet

SM reglet is designed for installation on any type of parapet wall, including tilt-up panels, precast panels, masonry and other smooth surfaces. Reglets are sur

Fry Reglet Sm Galvanized Reglet

SM reglet is designed for installation on any type of parapet wall, including tilt-up panels, precast panels, masonry and other smooth surfaces. Reglets are sur

Fry Reglet Aluminum "Stx" Stucco Reglet - Sold per Lin. Ft.

STX reglet is specifically engineered for stucco over block conditions, and designed to accept Springlok flashing and other flexible flashing. A "V" projection

Fry Reglet Stainless Steel Springlok Flashing

SpringLok flashing systems have been tested and proven to resist sustained wind velocities. Flashing snaps in under the reglet so water can't get under the flas

Fry Reglet Stainless Steel Reglet Inside Corner

The Inside Corner creates a square and true termination at inside corners of 5/16" fiber cement panels. This allows for easy installation and minimal extrusion

Fry Reglet Stainless Steel Reglet Outside Corner

Fry Reglet FCP Outside Corner creates a straight and true, abuse resistant corner with exposed flanges that cover the vertical ends of the fiber cement panels.

Fry Reglet Stainless Steel Flashing Inside Corner

Fry Reglet Ma Aluminum Reglet

MA Aluminum Reglet are specially manufactured for masonry applications, this reglet is laid into masonry joints and held in place with mortar.

Fry Reglet Stainless Steel "Sm" Surface Mounted Reglet

SM reglet is designed for installation on any type of parapet wall, including tilt-up panels, precast panels, masonry and other smooth surfaces. Reglets are sur

Fry Reglet Galvanized Flashing Inside