Malco

Malco 18" Folding Tool with 3/8" & 1" Depths

Folding Tool seams are formed from two steel halves, permanently joined together. Handy sight holes assure proper depth alignment.

Malco 13/16" Hand Notcher

Specialized for folding and fabricating metal, including metal ductwork. The N2R Hand Notcher makes a full 1-inch (25.4 mm) deep "V" shaped corner notch in 24-g

Malco SideSwiper Ii Vinyl Siding Remover Tool

SideSwiper model SRT2 combines the comfort and added leverage of an easy-to-grasp straight handle with the smooth unlocking motion of a burr free hook. The blad

Malco Snap Lock Punch — MALSL5

Snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel used as a finishing course at top of wall or below window. T

Malco 30' Tape

Malco 2-In-1 Hand Riveter

One hand operation with normal squeezing action provides enough pulling power to set all popular size rivets. 2-in-1 adjustment features a single long stroke fo

Malco Economy Hand Riveter

Lightweight, compact size and slim nose projection allows this riveter to go wherever the work is. Four rivet nosepieces: 3/32", 1/8", 5/32", and 3/16" store in

Malco Sheet Metal Snap Lock Punch

Create locking tabs for resizing rectangular metal duct at the job site. The Malco SL1R Snap Lock Punch raises a louver-shaped projection along the edge of shee

Malco Single Blade Pipe Crimper

Fast, easy to use and lightweight. Handy lock makes tool pocket sized. Zinc plated steel. Red grips.

Malco Adjustable Snap Lock Punch

Slide adjustment for throat depth allows settings from 1/4 to 5/8 inch (6 to 16 mm) depth. Easy one-hand operation. Ideal for crimping gutter end caps in place.

Malco 5/8" J-Channel Cutter

Use a versatile Malco J-Channel Cutter to make drain tabs, downstream notch cutouts and miter trim cuts in vinyl channel.

Malco Double 4-1/2" Sider Scoring Tool

Save up to 3 profitable hours on each job with the innovative Sider. It works quickly and accurately, replacing chalk lines, squares and straight edges. Use it

Malco Shingle Pad

Malco 12" Folding Tool with 3/8" & 1" Depths

Folding Tool seams are formed from two steel halves, permanently joined together. Handy sight holes assure proper depth alignment.

Malco Nail Hole Slot Punch

The NHP1R Punch makes a generous 5/32 x 3/4 in. (4.0 x 19.1 mm) horizontal slot for adding or elongating nail holes in vinyl and .019 in. (0.48 mm) aluminum sid

Malco Heavy-Duty Trim Nail Punch

Drive trim nails into soffit, fascia and other finishing trim without denting or marring material. All-steel nose and aluminum tail piece directs weight of this

Malco 1/4" Hex Chuck Driver

Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks, meet on-the-job demands for performance and service life whether

Malco 12" Andy Original Pattern Snip Replacement Blade

Malco 5-Blade Crimper For Sheet Metal Pipe

Use the Malco C5R Crimper to downsize stove pipe and round metal duct to create a male connection for joining sections. The five blades of this versatile job-si

Malco 5-Blade Crimper- Sheet Metal Downspout

Use the Malco C4R Crimper to produce a crimp that downsizes corners of aluminum or steel downspout to create a male connection for joining downspout sections. T

Malco Vinyl Snap Lock Punch

The SL8R Punch produces wider, more prominent rectangular tab projections for securing vinyl skirting or siding to finishing trim. The raised tabs grip a greate

Malco 1/4" Magnetic Hex Chuck Driver Long

Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks, meet on-the-job demands for performance and service life whether

Malco 1/4" Extra Long Magnetic Hex Driver

Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks, meet on-the-job demands for performance and service life whether

Malco Double 4" Sider Scoring Tool

Save up to 3 profitable hours on each job with the innovative Sider. It works quickly and accurately, replacing chalk lines, squares and straight edges. Use it