Simpson Strong-Tie

Simpson Strong-Tie Quik Drive Roofing Tile Attachment

Simpson Strong-Tie 0.27 Caliber (Level 5) 10-Shot Strip - Box of 100 — SSPP27SL5

Simpson Strong-Tie® P27SL .27-caliber single-shot loads are compatible with all Simpson Strong-Tie .27-caliber tools and other common .27-caliber tools.

Simpson Strong-Tie 0.27 Caliber (Level 5) 10-Shot Strip - Box of 100 — SSPP27SL4

Simpson Strong-Tie® P27SL .27-caliber single-shot loads are compatible with all Simpson Strong-Tie .27-caliber tools and other common .27-caliber tools.

Simpson Strong-Tie 0.27 Caliber (Level 5) 10-Shot Strip - Box of 100 — SSPP27SL3

Simpson Strong-Tie® P27SL .27-caliber single-shot loads are compatible with all Simpson Strong-Tie .27-caliber tools and other common .27-caliber tools.

Simpson Strong-Tie 7-1/2" Quik Drive Replacement Mandrel

Simpson Strong-Tie Opti-Mix Mixing Nozzles - Pack of 6

The Optimix static mixing nozzle is specifically designed for crack injection epoxies and ensures thorough mixing of epoxy components. For use with both low-vis

Simpson Strong-Tie QuickDrive Srf Decking Attachment Pro 300S

Simpson Strong-Tie 18 Gauge x 1-1/4" Type 316 Stainless Steel Straight Brads - Box of 5,000

Simpson Strong-Tie Tension Bridging

Tension-type bridging with maximum nailing flexibility. Use just two of the seven nail holes at each end.

Simpson Strong-Tie Acrylic Adhesive Mixing Nozzle

A 19-element high-strength static mixing nozzle for use with all acrylic adhesive products.

Simpson Strong-Tie Epoxy Mixing Nozzle

An 18-element mixing nozzle with integrated nut for use with 22 oz. and 56 oz. epoxy adhesive cartridges.

Simpson Strong-Tie 3/4" x 4" Steel Hole Cleaning Brush

Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson

Simpson Strong-Tie 1/2" x 3" Nylon Hole-Cleaning Brush

Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson

Simpson Strong-Tie Power Tool Set

Power-setting tool featuring an SDS-plus shank, designed for use with the Simpson Strong-Tie® Drop-In anchor (DIAB), ensuring fast, easy and economical installa

Simpson Strong-Tie 3/8" Heli-Tie Install Tool

Required for correct installation of Heli-Tie wall ties. Speeds up installation and automatically countersinks the tie into the facade material.

Simpson Strong-Tie Drop-In Threaded Coil Setting Tool

Hand-setting tool designed for use with the Simpson Strong-Tie® Drop-In anchor (DIAB), ensuring fast, easy and economical installation.

Simpson Strong-Tie 1/2" Drop-In Setting Tool

Use the drop-in anchor setting tool to facilitate placement of the Simpson Strong-Tie® Drop-In anchor (DIA). Using a fixed-depth drill bit prevents overdrilling

Simpson Strong-Tie Powder-Actuated Tool Gun

The PT-27 is a semi-automatic and fast-cycling fastening tool that is engineered for continuous use, high reliability and low maintenance. This versatile tool f

Simpson Strong-Tie Titen Installation Tool Kit

The Simpson Strong-Tie® Titen screw installation kit makes installation of Titen screws quick and easy. Accessories are compatible with a standard three-jaw sty

Simpson Strong-Tie 16" Insulation Support

The insulation supports are cut from carbon steel spring wire for optimum flexibility and strength. Mitered tips dig into the wood, securing itself and insulati

Simpson Strong-Tie ITS3.56/11.88 Top Flange I-Joist Hanger

Top Flange I-Joist Hanger sets the standard for engineered wood top-flange hangers. The ITS installs faster and uses fewer nails than any other EWP top-flange h

Simpson Strong-Tie 2" x 10" Slopeable Light Rafter U Hanger

Simpson Strong-Tie 1/2" Plywood Sheathing Clip - Box of 250

Simpson Strong-Tie panel sheathing clip is used to brace unsupported sheathing edges and provide a 1/8" gap to address shrinkage and expansion of roof sheathing

Simpson Strong-Tie 15/32" Plywood Sheathing Clip - Box of 250

Simpson Strong-Tie panel sheathing clip is used to brace unsupported sheathing edges and provide a 1/8" gap to address shrinkage and expansion of roof sheathing