Stockton Products

Stockton Products 7/8" x 10' Galvanized Wire WeepAid

Designed to act as a foundation screed for conventional 3-coat 7/8" stucco, WeepAid® maximizes the weep area and reduces the opportunity for stucco to stain or

Stockton Products 1/2" x 2" x 10' Soffit Vent with Vent Slots

Stockton Products (Pcs 375-100) Plaster Channel Screed

Channel screed style reveal that provides decorative shadow lines and accent stripes in an exterior finish. Has return keys for screeding of stucco. Can also be

Stockton Products (Dcs 50-300) Drywall Channel Screed

Channel screed style reveal that provides decorative shadow lines and accent stripes in an exterior finish. Has return keys for screeding of stucco. Can also be

Stockton Products (Dcs 50-50) Drywall Channel Screed

Channel screed style reveal that provides decorative shadow lines and accent stripes in an exterior finish. Has return keys for screeding of stucco. Can also be

Stockton Products 4" x 250' Galvanized Wire Roll Stripping

An all-purpose interior or exterior plaster or stucco reinforcement used over a variety of substrates such as drywall, plywood, OSB, foam board systems, etc. an

Stockton Products 3/4" x 3-1/2" x 2-1/2" M-Slide Expansion Joint

The dual function self-aligning expansion joint provides movement capability at floor line while allowing moisture to release from the top ground and lock out m

Stockton Products 10' Plastic Nose Galvanized Wire StockAid

Plastic Nose StockAid® is the lower cost, three nose wire version of plastic nose CornerBead. It is also used by the fireproofing industry for boxed and contour

Stockton Products 4" x 10' Galvanized Vent Screed with 7/8" Ground & 1/4" Holes

Stockton Products 2" x 10' Galvanized Single Point Vent Screed with 3/4" Ground & 1/8" Holes

Single pointed vent used a at soffit/wall condition where uneven surfaces exist providing perimeter airflow into the soffit.

Stockton Products 10' Stainless Steel Wire CornerAid

The premier product used for exterior corner reinforcing with conventional 3-coat 7/8" stucco. It features a five nose wire configuration that develops a strong

Stockton Products 17.5 Gauge 10' G-60 Galvanized Wire StockAid

A lower cost alternative to the original CornerAid® with fewer reinforcing wires. Three nose wire design used for exterior corner reinforcing with conventional

Stockton Products 17.5 Gauge 10' G-60 Galvanized Metal Short Flange Casing

Shaped for exterior or interior corners on doors, windows and panel systems where a short flange or stop is needed. It offers one standard 2 3/8" leg and one sh

Stockton Products 17.5 Gauge x 7/16" x 10' G-60 Galvanized Wire Bullnose E

G-60 Galvanized Wire Bullnose E is used when rounded corners are desired.

Stockton Products 17.5 Gauge x 10' G-60 Galvanized Wire ArchAid

Designed for smooth, symmetrical arches and curves with minimal distortion. Enables faster construction of inside and outside curves. It has standard 2 3/8" leg

Stockton Products 17.5 Gauge x 10' G-60 Galvanized Wire One-Coat

One-Coat Patterned after CornerAid® but with a tight fit on the corner. It is to be used over an insulated foam board system for 1/4" to 3/8" EIFS and One Coat

Stockton Products 17.5 Gauge x 7/16" x 10' G-60 Galvanized Bullnose Short Flange

BullNose Short Flange combines the features of regular BullNose and Short-Flange. It is used with Spanish or Mediterranean architecture for rounded corners, sil

Stockton Products 17.5 Gauge x 7/16" x 10' G-60 Galvanized Wire Bullnose ArchAid

BullNose ArchAid® this smooth, round arch is designed with one rigid and one flexible leg for tailoring to the curve.

Stockton Products 1/2" x 3/4" x 10' Soffit Vent/Reveal Screed

Standard soffit vent provides required perimeter airflow into soffit air space.

Stockton Products 1/2" x 1" x 10' Soffit Vent/Reveal Screed

Standard soffit vent provides required perimeter airflow into soffit air space.

Stockton Products 3/8" x 3/4" x 10' Soffit Vent/Reveal Screed

Standard soffit vent provides required perimeter airflow into soffit air space.

Stockton Products 3/8" x 1" x 10' Soffit Vent/Reveal Screed

Standard soffit vent provides required perimeter airflow into soffit air space.

Stockton Products 1/2" x 3" x 10' Soffit Vent/Reveal Screed

Standard soffit vent provides required perimeter airflow into soffit air space.

Stockton Products 1/2" x 4" x 10' Soffit Vent/Reveal Screed

Standard soffit vent provides required perimeter airflow into soffit air space.