Tamlyn

Tamlyn 5/16" x 12' H-Mold — RHT516HMOLD12

Covers the end seams of the soffit material and continuous vents, providing a more appealing appearance than simply butting the vents end to end.

Tamlyn 5/16" x 12' H-Mold — RHT516HMOLD12

Covers the end seams of the soffit material and continuous vents, providing a more appealing appearance than simply butting the vents end to end.

Tamlyn 8' XtremeTrim Starter Strip

Starter Strip has starter/bottom course for both vertical and lap siding. Provides ease-of-installation with correct angle.

Tamlyn Window Flashing

Window flashing provides an easy to install and long-lasting method of stopping water penetration. It is used over window trim, band boards, panel intersections

Tamlyn 5/16" x 8' Vinyl-Coat Z Bar

Z Flashing provides an easy to install and long-lasting method of stopping water penetration. It is used over window trim, band boards, panel intersections, and

Tamlyn 4" x 75' Rht Polyguard Window Seal

Tamlyn 8-1/4" XtremeTrim Plank Flash — TLNVCPF825WH

XtremeTrim Plank Flash is use to reduce moisture penetration behind the joint where two planks butt together and drain water over the top edge of the last full

Tamlyn 8-1/4" XtremeTrim Plank Flash — TLNVCPF825KB

XtremeTrim Plank Flash is use to reduce moisture penetration behind the joint where two planks butt together and drain water over the top edge of the last full

Tamlyn 8-1/4" XtremeTrim Plank Flash — TLNVCPF825IG

XtremeTrim Plank Flash is use to reduce moisture penetration behind the joint where two planks butt together and drain water over the top edge of the last full

Tamlyn 5/16" x 8' XtremeTrim Horizontal Z-Bar

Provides clean and consistent horizontal transition between panels. True size designed as an independent profiles for use as required in some designs.

Tamlyn 1/4" x 5/16" XtremeTrim Bead

XtremeTrim® Vertical Bead Reveal serves as an aesthetic expansion joint between panels. Works with all panel profiles/ finishes. A better, more appealing and se

Tamlyn 10' XtremeTrimLow Profile Outside Corner

Low Profile Outside Corner has very popular face sizes which offer a clean outside corner for vertical siding panels or lap siding. Works well with all vertical

Tamlyn 8' XtremeTrim Basic Horizontal Z Profile

Provides clean and consistent horizontal transition between panels. True size designed as an independent profiles for use as required in some designs.

Tamlyn 5/16" XtremeTrim Vertical Reveal Primed

Designed to create a uniform, aesthetically consistent open vertical reveal between panel or lap siding. The one-piece reveal is fast and economical to install.

Tamlyn 3/8" XtremeTrim Adjacent Reveal Z-Bar

Provides clean and consistent horizontal transition between panels. Designed to work in conjunction with Vertical Reveal and Siding H Mold. Design affords great

Tamlyn 3/8" XtremeTrim Heavy Zeam Z-Bar

Provides clean and consistent horizontal transition between panels. Designed to work in conjunction with Vertical Reveal and Siding H Mold.

Tamlyn 5/16" x 8' XtremeTrim Panalseam Vertical T-Mold

XtremeTrim® Vertical Panelseam® T-Mold serves as a minimal expansion joint between panels.

Tamlyn 3/8" x 15/32" x 2" XtremeTrim Horizontal Reveal Profile

The Horizontal Reveal is a profile that compliments the XtremeTrim® Vertical Reveal. Patented retention leg on back prevents flexing with expansion.

Tamlyn 3/8" x 5/16" x 3/4" XtremeTrim Basic Horizontal Z Profile

Provides clean and consistent horizontal transition between panels. True size designed as an independent profiles for use as required in some designs.

Tamlyn 1/2" x 3/8" x 3/8" XtremeTrim Vertical Siding H Mold Profile

Designed to cover vertical joints in siding. Longer lasting and more effective than contractor grade caulk. Provides a smooth seam at joints.

Tamlyn 5/16" XtremeTrim Panel

XtremeTrim Reveal Open Outside Corner provides a clean minimal set away open outside corner in an inset style which compliments the Vertical Reveal System.

Tamlyn 1/2" XtremeTrim Panel Corner

XtremeTrim Panel Inside Corner design provides a minimal exposed inside corner.

Tamlyn 5/16" XtremeTrim J-Mold

Provides a clean finish at openings, edges of panels or planks and at material transitions. Specifically designed to work in conjunction with other XtremeTrim®

Tamlyn XtremeTrim Zeam Heavy Z-Bar

Provides clean and consistent horizontal transition between panels. Designed to work in conjunction with Vertical Reveal and Siding H Mold.