Simpson Strong-Tie

Simpson Strong-Tie 5/8" x 16" Retrofit Anchor Bolt

RFBs are pre-cut threaded rod, supplied with nut and washer. For use with Simpson Strong-Tie® adhesives. Use with Simpson Strong-Tie adhesives to anchor into ex

Simpson Strong-Tie 18 Gauge H2.5A Hurricane Tie with Zmax Coating

Simpson Strong-Tie hurricane tie provide a positive connection between the truss/rafter and the wall of the structure to resist wind and seismic forces.

Simpson Strong-Tie 1-1/2" (10d) Hot-Dipped Galvanized Hanger Nail - 1 Lb. Box

Simpson Strong-Tie Connector nails are the best choice for Simpson Strong-Tie connectors.

Simpson Strong-Tie 12 Gauge HGUS5.50/12 Face Mount Joist Hanger

All hangers in this series have double-shear nailing - an innovation that distributes the load through two points on each joist nail for greater strength. This

Simpson Strong-Tie Tension Tie

Tension ties offer a solution for resisting tension loads that are fastened with nails. The HTT4 feature an optimized nailing pattern which results in better pe

Simpson Strong-Tie 2" Holdown Anchor

Simpson Strong-Tie 4" x 10" Skewed Right 45° Face Mount Joist Hanger

The SU and HSU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper installation.

Simpson Strong-Tie 14 Gauge 2" x 10" Heavy Duty Hanger

HUC hangers may be installed on a masonry/concrete walls.

Simpson Strong-Tie Zmax Angle Connector

The A35 angle's exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the

Simpson Strong-Tie Tension Bridging

Tension-type bridging with maximum nailing flexibility. Use just two of the seven nail holes at each end.

Simpson Strong-Tie 3" x 3" Galvanized Slotted Bearing Plate with 1/2" Bolt

The LBPS are bearing plates that offer increased flexibility while meeting the latest requirements of the code for walls. The slotted hole allows for adjustabil

Simpson Strong-Tie 2" x 12" Nail-Less Bridging

Nailless installation eliminates callbacks for nail squeaks. Designed for secure grip before the drive-home blow, and deeper prong penetration. Precision-formed

Simpson Strong-Tie 13 Gauge 1-1/2" (4d) Type 304 Stainless Steel Ring Shank 15° Wire Coil Siding Nails - Box of 3,600

Combine the short-term benefit of increased fastening efficiency and the long-term benefit of stainless-steel fasteners with these stainless-steel wire-coil col

Simpson Strong-Tie 13 Gauge 2-1/2" (8d) Type 304 Stainless Steel Ring Shank 15° Wire Coil Siding Nails - Box of 3,600

Combine the short-term benefit of increased fastening efficiency and the long-term benefit of stainless-steel fasteners with these stainless-steel wire-coil col

Simpson Strong-Tie 14 Gauge 1-3/4" (5d) Type 304 Stainless Steel Ring Shank Wood Siding Nails - 5 Lb. Box

Simpson Strong-Tie 14 Gauge 4" x 10" Face Mount Joist Hanger

All hangers in this series have double-shear nailing - an innovation that distributes the load through two points on each joist nail for greater strength. This

Simpson Strong-Tie 18 Gauge 2-1/2" x 11-7/8" Face Mount I-Joist Hanger

The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. Installation is fast with the Strong-Grip™ seat, easy-to-rea

Simpson Strong-Tie 12 Gauge 4" x 10" Face Mount Joist Hanger

All hangers in this series have double-shear nailing - an innovation that distributes the load through two points on each joist nail for greater strength. This

Simpson Strong-Tie LRU28Z Rafter Hanger

The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid sawn rafters, the LRUZ

Simpson Strong-Tie HUC410 Heavy Duty Concealed Joist Hanger

The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing clea

Simpson Strong-Tie 18 Gauge 2-5/8" x 9-7/16" Top Flange I-Joist Hanger

Top Flange I-Joist Hanger sets the standard for engineered wood top-flange hangers. The ITS installs faster and uses fewer nails than any other EWP top-flange h

Simpson Strong-Tie Acrylic Adhesive Mixing Nozzle

A 19-element high-strength static mixing nozzle for use with all acrylic adhesive products.

Simpson Strong-Tie EDT22S Manual Dispensing Tool for 22 Oz. Cartridge

The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use. The tool can be easily converted.

Simpson Strong-Tie Epoxy Mixing Nozzle

An 18-element mixing nozzle with integrated nut for use with 22 oz. and 56 oz. epoxy adhesive cartridges.