Simpson Strong-Tie

Simpson Strong-Tie 18 Gauge x 2-1/2" x 11-7/8" Top Flange I-Joist Hanger

Top Flange I-Joist Hanger sets the standard for engineered wood top-flange hangers. The ITS installs faster and uses fewer nails than any other EWP top-flange h

Simpson Strong-Tie 16 Gauge 6" x 12" Heavy-Duty Face Mount Joist Hanger with Screw

The HUCQ series are heavy-duty joist hangers that incorporate Simpson Strong-Tie® Strong-Drive® SDS Heavy-Duty Connector screws. Designed and tested for install

Simpson Strong-Tie 3 Gauge 5-1/4" Glulam Beam Seat

The GLB series provides a connection between beam and concrete or CMU pilaster.

Simpson Strong-Tie #10 x 1-1/4" Type 305 Stainless Steel Pocket-Hole Screw - Carton of 1,500

Simpson Strong-Tie 14 Gauge 4" x 8" Face Mount Joist Hanger

All hangers in this series have double-shear nailing - an innovation that distributes the load through two points on each joist nail for greater strength. This

Simpson Strong-Tie 6" x 6" Moment Post Base with Zmax Coating

MPBZ is the first post base specifically designed to provide moment resistance for columns or posts. An innovative overlapping sleeve design encapsulates the po

Simpson Strong-Tie 14 Gauge 4" x 12" Double Face Mount I-Joist Hanger

HU series have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails. These heavy-duty connectors are designe

Simpson Strong-Tie MIU5.12/9 Double Face Mount I-Joist Hanger

The MIU hangers are designed for commercial and high-load I-joist applications without requiring web stiffeners. The MIU features Positive Angle Nailing (PAN),

Simpson Strong-Tie 1-3/4" Quik Drive Yellow Zinc Course Twin Thread Wood Screws - Box of 2,000

Simpson Strong-Tie 4" x 10" Skewed Left 45° Face Mount Joist Hanger

The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper installation.

Simpson Strong-Tie 16 Gauge x 2-9/16" x 3-3/16" x 11-3/16" Skewed Left 45° Joist Hanger

The SUR/L are 45°-skewed hangers designed to support solid sawn and engineered wood products used in wood construction. These U-shaped hangers encapsulate the t

Simpson Strong-Tie 16 Gauge x 1-13/16" x 9" Skewed Right 45° Joist Hanger

The SU and HSU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper installation.

Simpson Strong-Tie 16 Gauge x 1-13/16" x 9" Skewed Left 45° Joist Hanger

The SU series of hangers are skewed 45° left or right. Angled nail slots direct nails for proper installation.

Simpson Strong-Tie 3/4" Drop-In Anchor Coil - Box of 20

Drop-In anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Minimum thread engagement should

Simpson Strong-Tie #9 x 2-1/2" Strong-Drive Sd Connector Screws - Pack of 100

The Strong-Drive SD Connector screw is specifically designed to replace nails in certain Simpson Strong-Tie connectors and is the only screw approved for that a

Simpson Strong-Tie #7 x 2-1/4" Tb-ty Type 305 Stainless Steel Deck-Fastening System for 3/16" Board Spacing - Box of 300

The new EB-TY Premium Hidden Deck-Fastening System is the ideal solution that blends strength with ease of installation in a fastener that won't detract from th

Simpson Strong-Tie 16 Gauge H6Z Hurricane Tie with Zmax Coating

Simpson Strong-Tie hurricane tie provide a positive connection between the truss/rafter and the wall of the structure to resist wind and seismic forces.

Simpson Strong-Tie Variable Girder Tiedown

The variable-pitch girder tiedown is a high-capacity tiedown for single- or multi-ply CFS girder trusses. It attaches with self-drilling screws from the side of

Simpson Strong-Tie ADT813S Manual Dispensing Tool for 12.5 Oz. Cartridges

The ADT813S features a steel carriage for ultimate durability. The ADT813S also features double-gripping plates that help extend tool life.

Simpson Strong-Tie 1/2" Plywood Clip

Simpson Strong-Tie panel sheathing clip is used to brace unsupported sheathing edges and provide a 1/8" gap to address shrinkage and expansion of roof sheathing

Simpson Strong-Tie HUC210-3 Heavy Duty Hanger

The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing clea

Simpson Strong-Tie 1-1/2" Stainless Steel Ring Shank Coil Siding Nail - 5 Lb. Box

Simpson Strong-Tie 1-1/2" Type 304 4DRing Shank Shake/Shingle Nail - 25 Lb. Box

Simpson Strong-Tie 1/2" Coil Thread Drop-In Anchor

Drop-In anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Minimum thread engagement should